WXTMGMD Tools Repair 5.6 GPM Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This wxtmgmd tools repair 5 6 gpm review focuses on the WXTMGMD 3500 PSI 5.6 GPM Pump, a replacement part for pressure washer systems. It is designed for general right shaft applications and fits belt drive setups. The unit delivers a flow rate of 5.6 gallons per minute and handles a maximum pressure of 3500 PSI. These two specifications define its performance envelope. The pump is listed as a direct replacement for old or damaged units. Its construction aims for durability and practical use. You get a compact component that matches original equipment dimensions. This listing provides the core mechanical details you need to verify compatibility with your existing machine.
What stands out
- 5.6 GPM flow rate
- 3500 PSI maximum pressure
- Compact 1.76 ounce weight
- Designed as a direct replacement for damaged pumps
Who it fits
Good fit for
This pump suits users who need to replace a worn-out pressure washer pump with similar output. If your machine originally specified 3500 PSI and 5.6 GPM, this unit matches those requirements. It is ideal for homeowners maintaining standard electric pressure washers. The compact size makes it suitable for tight engine bays. You should verify that your current setup uses a general right shaft and belt drive configuration before purchasing. This part is best for repairs where maintaining original performance levels is the primary goal.
Who should skip it
Skip this option if you require higher pressure or flow rates. The 3500 PSI limit may be insufficient for heavy-duty industrial cleaning tasks. Similarly, the 5.6 GPM output might be too low for large-scale commercial jobs. Do not buy this if your pressure washer uses a left shaft or direct drive system, as the listing specifies a general right shaft and belt drive. It is also not suitable if you need a complete pressure washer unit, as this is strictly a replacement pump component.
Verdict: This is a spec-matched replacement pump for standard 3500 PSI pressure washers. Verify your shaft type and drive system before installation.
Key specs explained
Flow Rate: 5.6 GPM
This value indicates the volume of water the pump moves per minute. A 5.6 GPM rate provides strong rinsing power for large surfaces like driveways or siding. You will notice faster cleaning times compared to lower flow models. This spec is critical for maintaining consistent pressure while washing. It suits users who prioritize speed and coverage area over fine detail work on smaller items.
Maximum Pressure: 3500 PSI
This figure represents the peak force the water exerts on dirt and grime. 3500 PSI is a high output level, capable of stripping heavy paint, mold, or caked-on mud. It is suitable for tough commercial or residential jobs. You should ensure your hoses and nozzles are rated for this pressure to prevent damage. This level exceeds standard home use requirements for most light cleaning tasks.
Weight: 1.76 ounces
This measurement describes the physical mass of the pump unit. A weight of 1.76 ounces suggests a lightweight construction, likely made of aluminum or similar materials. This makes installation easier as you handle the component with less effort. It also reduces the overall load on your pressure washer frame. Lighter pumps can simplify maintenance and replacement procedures for technicians.
Model: WXTMGMD913
This identifier distinguishes the specific pump configuration from other units in the line. You should use this number when ordering replacement parts or consulting technical diagrams. It ensures you receive the correct internal seals, valves, and shafts. Matching the model number exactly prevents compatibility issues with your existing pressure washer chassis. It is essential for accurate inventory and repair planning.
Design and build details
The listing describes the WXTMGMD 3500 PSI 5.6 GPM Pump as a replacement unit for pressure washer systems. According to the listing, it features a small and exquisite appearance with a beautiful design. The manufacturer states the unit has good texture and great workmanship. These details suggest a finish intended to match original equipment closely. The goal is to provide a durable and practical replacement for old or damaged pumps.
Physical dimensions are listed as one size, with a single color option. The model number is WXTMGMD913. The weight is specified as 1.76 ounces. This light weight is notable for a pump component, though it likely refers to the pump head or internal assembly rather than the entire mounted unit. You should verify the total assembly weight if you are concerned about balance or mounting stress.
The design is built for general right shaft applications and fits belt drive setups. This specific configuration limits where you can install it. You must ensure your pressure washer uses a right-hand shaft and a belt drive system. The compact form factor allows it to fit into standard pump housings. The listing emphasizes high matching with original equipment, which implies standard mounting holes and port sizes. This makes it a straightforward swap if your current pump has failed.
Setup And Everyday Use Guide
This unit is a replacement pump, not a complete pressure washer. You will install it into an existing system. The listing specifies it is for a general right shaft configuration. It also notes compatibility with belt drive setups. This means you need a compatible motor and belt arrangement. The pump itself is compact. Its small size helps in fitting tight engine bays. You should verify your current shaft type before purchasing. The model number is WXTMGMD913. This specific model ensures it matches original equipment dimensions. The listing claims a high match to original parts. This suggests straightforward mounting if your frame aligns. Daily operation relies on the 5.6 GPM flow rate. This volume moves water quickly across surfaces. You will see faster rinse times on large areas. The 3500 PSI maximum pressure provides strong cleaning force. This pressure level is suitable for tough grime. The manufacturer states the unit has a long service life. It also mentions good texture and durability. These features imply it can handle regular use. The design is described as exquisite and delicate. This likely refers to the finish and build quality. You will need to connect water supply lines and high-pressure hoses. Ensure all fittings are secure before starting. The pump is designed for general repair tasks. It serves as a direct swap for damaged units. Check your belt tension after installation. Proper tension is key for efficient power transfer. The unit does not include a motor or tank. You must source those separately. This is a component upgrade, not a full system. Use it to restore performance to your existing washer.
Before You Buy This Pump
This item is a replacement pump, not a complete pressure washer. You must verify your existing system matches the general right shaft configuration before ordering. Belt drive compatibility is also required. Check your current pump’s mounting holes and shaft orientation to ensure a proper fit. The 5.6 GPM flow rate and 3500 PSI pressure are specific to this model. Other options in this guide may offer different shaft types or lower flow rates. You will need to source your own motor, frame, and wand if you are building a system from scratch. Regular maintenance includes checking for oil leaks and ensuring the inlet filter is clean. This part suits users who already have a compatible frame and need a direct swap. It does not include hoses or guns. Verify all dimensions against your old unit. This ensures you avoid costly returns or installation errors. The focus is strictly on mechanical compatibility and performance specs.
Check before you buy
- Confirm your frame uses a general right shaft configuration.
- Verify your drive system is compatible with belt drive setups.
- Check mounting hole patterns match your existing pressure washer frame.
- Ensure your motor can handle the 5.6 GPM flow rate.
- Inspect your current pump for shaft damage before ordering.
The product at a glance
WXTMGMD 3500 PSI 5.6 GPM Pump
Best for: Right shaft 3500 PSI pump replacement
- Maximum Pressure
- 3500 PSI
- Flow Rate
- 5.6 GPM
- Weight
- 1.76 ounces
View on Amazon: WXTMGMD 3500 PSI 5.6 GPM Pump Affiliate link
This is a replacement pressure washer pump from WXTMGMD. It delivers 5.6 GPM flow and 3500 PSI max pressure. The unit weighs 1.76 ounces and fits general right shaft applications. It is designed as a direct replacement for old or damaged pumps. You will find it suitable for maintaining or repairing standard belt-drive pressure washer systems.
Pros
- 5.6 GPM flow rate
- 3500 PSI maximum pressure
- Lightweight at 1.76 ounces
- Designed as a direct replacement
Cons
- Limited to right shaft configuration
- Requires belt drive system
- No included mounting hardware
Good fit if
- You need a replacement pump for a 3500 PSI washer
- Your machine uses a right shaft configuration
- You are repairing a belt drive system
Skip if
- You need a complete pressure washer unit
- Your machine uses a left shaft configuration
- You require a direct drive pump
Verdict: WXTMGMD 5.6 GPM 3500 PSI Pump fits owners of 3500 PSI belt-drive machines needing a right shaft replacement. It provides the necessary flow and pressure for standard repair tasks.
Specifications side by side
| Spec | WXTMGMD 3500 PSI 5.6 GPM Pump |
|---|---|
| Maximum Pressure | 3500 PSI |
| Flow Rate | 5.6 GPM |
| Pressure | 3500 PSI |
| Weight | 1.76 ounces |
| Size | One Size |
| Color | One Color |
| Model | WXTMGMD913 |
Frequently asked questions
What is the maximum pressure rating for this pump?
The WXTMGMD 3500 PSI 5.6 GPM Pump has a maximum pressure rating of 3500 PSI. This specification indicates the peak force the unit can generate. It is suitable for standard belt-drive pressure washer systems requiring this specific pressure level for effective cleaning tasks.
Does this pump fit belt drive machines?
Yes, this unit is designed for belt drive setups. The listing confirms compatibility with belt drive configurations. This makes it a direct replacement for existing systems that use a belt to transfer power from the motor to the pump shaft.
Which shaft orientation does this model use?
This pump features a right shaft configuration. The product data specifies it is intended for general right shaft applications. You should verify your existing machine uses a right shaft before installation to ensure proper mechanical alignment and function.
What is the flow rate of this pump?
The unit delivers a flow rate of 5.6 gallons per minute. This volume of water movement supports strong rinsing power on large surfaces. The 5.6 GPM rate helps reduce cleaning time for driveways and siding compared to lower flow models.
Is this a complete pressure washer or just a part?
This item is a replacement pump, not a complete pressure washer. It is designed to be installed into an existing machine. You must verify your current system matches the required specifications before ordering this component for repair purposes.
What is the model number for this pump?
The model number is WXTMGMD913. This identifier helps you locate the correct replacement part for your specific machine. Use this number when checking compatibility or searching for additional technical documentation regarding the unit's installation requirements.